The Lagoon Nebula 

July 20, 1969: People around the world tune their radios and television sets to watch humans step foot on the Moon for the first time.

Gather ‘round with us today and experience history as it unfolded 50 years ago.

Watch NASA TV at 4:02 p.m. EDT as we replay the original live broadcast of the Apollo 11 Moon landing. 

Then, at 10:38 p.m. EDT, watch the replay of the original live broadcast of the first steps on the Moon, as the world watched it in 1969: 

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com.

Cygnus Cargo Craft: What’s Onboard?

New experiments are scheduled to arrive to the International Space Station with the launch of Orbital ATK’s Cygnus cargo spacecraft on Tuesday. These science payloads will study fires, meteors, regolith, adhesion and 3-D printing in microgravity.

Take a look at the experiments:

Saffire-I

What is it? What happens when you set a fire in space? The Spacecraft Fire Experiment-I (Saffire-I) will find out!

How does it work? This experiment will intentionally light a large-scale fire inside an empty Cygnus resupply vehicle after it leaves the space station and before it re-enters Earth’s atmosphere.

Why is it important? The Saffire-I investigation provides a new way to study a realistic fire on an exploration vehicle, which has not been possible in the past because the risks for performing studies on manned spacecraft are too high. Instruments on the returning Cygnus will measure flame growth, oxygen use and more.

Meteor

What is it? A less heated investigation, Meteor Composition Determination (Meteor) will enable the first space-based observations of meteors entering Earth’s atmosphere from space. Meteors are somewhat rare and are difficult to monitor from the ground because of Earth’s atmosphere.

How does it work? This investigation uses high-resolution video and image analysis of the atmosphere to acquire the physical and chemical properties of the meteoroid dust, such as size, density and chemical composition.

Why is it important? Studying the elemental composition of meteors adds to our understanding of how the planets developed, and continuous measurement of meteor interactions with Earth’s atmosphere could spot previously unforeseen meteors.

Strata-1

What is it? A more “grounded” investigation will study the properties and behavior of regolith, the impact-shatterd “soil” found on asteroids, comets, the moon and other airless worlds.

How does it work? The Strata-1 experimental facility exposes a series of regolith simulants, including pulverized meteorite material, glass beads, and regolith simulants composed of terrestrial materials and stored in multiple transparent tubes, to prolonged microgravity on the space station. Scientists will monitor changes in regolith layers and layering, size sorting and particle migration via video images and close examination after return of the samples to Earth.

Why is it important? The Strata-1 investigation could give us new answers about how regolith behaves and moves in microgravity, how easy or difficult it is to anchor a spacecraft in regolith, how it interacts with spacecraft and spacesuit materials and other important properties.

Gecko Gripper

What is it? From grounded to gripping, another investigation launching takes inspiration from small lizards. Geckos have specialized hairs on their feed called setae that let them stick to vertical surfaces without falling, and their stickiness doesn’t wear off after repeated use. The Gecko Gripper investigation tests a gecko-adhesive gripping device that can stick on command in the harsh environment of space.

How does it work? The gripping device is a material with synthetic hairs much like setae that are much thinner than a human hair. When a force is applied to make the tiny hairs bend, the positively charged part of a molecule within a slight electrical field attracts the negatively charged part of its neighbor resulting in “stickiness.” Once adhered, the gripper can bear loads up to 20 pounds. The gripper can remain in place indefinitely and can also be easily removed and reused.

Why is it important? Gecko Grippers have many applications on current and future space missions, including acting as mounting devices for payloads, instruction manuals and many other small items within the space station. In addition, this technology enables a new type of robotic inspection system that could prove vital for spacecraft safety and repair.

Additive Manufacturing Facility

What is it? From adhesion to additive, the new Additive Manufacturing Facility (AMF) will also launch on the flight. Additive manufacturing (3D printing) is the process of building a part layer-by-layer, with an efficient use of the material.

How does it work? The AMF uses this technology to enable the production of components on the space station for both NASA and commercial objectives.

Why is it important? Parts, entire experiments and tools can be created on demand with this technology. The ability to manufacture on the orbiting laboratory enables on-demand repair and production capability, as well as essential research for manufacturing on long-term missions.

These sticky, stony and sizzling investigations are just a sampling of the wide range of science conducted on the orbiting laboratory that benefits future spaceflight and provides Earth-based benefits as well.

Watch the Launch!

You can watch the launch of Orbital ATK’s Cygnus spacecraft online. Stream live coverage starting at 10 p.m. EDT on March 22. Launch is scheduled for 11:05 p.m., which is the start of a 30-minute launch window. 

Watch online: nasa.gov/nasatv 

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

Go Behind-the-Scenes at NASA

Are you active on social media? Want to go behind-the-scenes at NASA and meet our scientists, engineers, astronauts and managers? Want to see and feel a rocket launch in-person? Then you would love our NASA Social events!

A NASA Social is a program that provides opportunities for our social media followers (like you!) to learn and share information about our missions, people and programs. Formerly known as NASA Tweetups, these socials include both special in-person events and social media credentials for people who share the news in a significant way. To date, this program has brought thousands of people together for unique social media experiences of exploration and discovery.

NASA Socials range from two hours to two days in length and include a “meet and greet” session to allow participants to mingle with fellow socialites and the people behind our social media accounts. The participants are selected from those who register their interest for the event on the web.

Do you need to have a social media account to register for a NASA Social? 

Yes. The socials are designed for social media users who follow @NASA on a variety of platforms. The goal of NASA Socials is to allow people who regularly interact with each other via these platforms to meet in person and discuss one of their favorite subjects: NASA!

What types of events have we hosted in the past? Take a look:

Participants for a NASA Social surrounding the launch of a SpaceX cargo vehicle to the International Space Station met with former Deputy Administrator Lori Garver underneath the engines of the Saturn V rocket.

A participant at a NASA Social in Washington tweets as he listens to astronaut Joe Acaba answer questions about his time living aboard the International Space Station.

Juno launch Tweetup participants pose for a group photo with NASA Administrator Charles Bolden with the Vehicle Assembly Building (VAB) in the background at Kennedy Space Center.

And of course, some of our NASA Socials culminate with a rocket launch! You can experience one in-person. Apply to attend a once in a lifetime experience. 

For more information about NASA Social events, and to see upcoming opportunities, visit: http://www.nasa.gov/social

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

New Sun Science Stamps from the U.S. Postal Service

To start off the summer, the U.S. Postal Service issued a set of stamps showcasing views of the Sun from our Solar Dynamics Observatory!

Since its launch in 2010, the Solar Dynamics Observatory (or SDO) has kept up a near-constant watch on the Sun from its vantage point in orbit around Earth. SDO watches the Sun in more than 10 different types of light, including some that are absorbed by Earth’s atmosphere so can only be seen from space. These different types of light allow scientists to study different parts of the Sun – from its surface to its atmosphere – and better understand the solar activity that can affect our technology on Earth and in space.

The new set of stamps features 10 images from SDO. Most of these images are in extreme ultraviolet light, which is invisible to human eyes.

Let’s explore the science behind some of the stamps!

Coronal hole (May 2016)

The dark area capping the northern polar region of the Sun is a coronal hole, a magnetically open area on the Sun from which high-speed solar wind escapes into space. Such high-speed solar wind streams can spark magnificent auroral displays on Earth when they collide with our planet’s magnetic field.

Solar flare (August 2011)

The bright flash on the Sun’s upper right is a powerful solar flare. Solar flares are bursts of light and energy that can disturb the part of Earth’s atmosphere where GPS and radio signals travel.

Active Sun (October 2014)

This view highlights the many active regions dotting the Sun’s surface. Active regions are areas of intense and complex magnetic fields on the Sun – linked to sunspots – that are prone to erupting with solar flares or explosions of material called coronal mass ejections.

Plasma blast (August 2012)

These images show a burst of material from the Sun, called a coronal mass ejection. These eruptions of magnetized solar material can create space weather effects on Earth when they collide with our planet’s magnetosphere, or magnetic environment – including aurora, satellite disruptions, and, when extreme, even power outages.

Coronal loops (July 2012)

These images show evolving coronal loops across the limb and disk of the Sun. Just days after these images were taken, the Sun unleashed a powerful solar flare.

Coronal loops are often found over sunspots and active regions, which are areas of intense and complex magnetic fields on the Sun.

Sunspots (October 2014)

This view in visible light – the type of light we can see – shows a cluster of sunspots near the center of the Sun. Sunspots appear dark because they are relatively cool compared to surrounding material, a consequence of the way their extremely dense magnetic field prevents heated material from rising to the solar surface.

For more Sun science, follow NASA Sun on Twitter, on Facebook, or on the web.

Make sure to follow us on Tumblr for your regular dose of space!

Space Food

Food: everyone needs it to survive and in space there’s no exception. Let’s take a closer look at what astronauts eat while in space. 

Since the start of human spaceflight, we’ve worked to improve the taste, texture and shelf life of food for our crews. Our food scientists are challenged with developing healthy menus that can meet all of the unique requirements for living and working in the extreme environment of space.

Consider the differences of living on Earth and in space. Food scientists must develop foods that will be easier to handle and consume in a microgravity environment. These food products require no refrigeration and provide the nutrition humans need to remain healthy during spaceflight.

Freeze drying food allows food to remain stable at ambient temperatures, while also significantly reducing the weight.

Fun Facts About Space Food:

Astronauts use tortillas in many of their meals

Tortillas provide an edible wrapper to keep food from floating away. Why tortillas and not bread? Tortillas make far less crumbs and can be stored easier. Bread crumbs could potentially float around and get stuck in filters or equipment.

The first food eaten by an American astronaut in space: Applesauce

The first American astronaut to eat in space dined on applesauce squeezed from a no-frills, aluminum toothpaste-like tube. Since then, food technology has cooked up better ways to prepare, package and preserve space fare in a tastier, more appetizing fashion.

All food that is sent to the space station is precooked

Sending precooked food means that it requires no refrigeration and is either ready to eat or can be prepared simply by adding water or by heating. The only exception are the fruit and vegetables stowed in the fresh food locker.

Salt and pepper are used in liquid form on the International Space Station

Seasonings like salt and pepper have to be used in liquid form and dispensed through a bottle on the space station. If they were granulated, the particles would float away before they even reached the food.

Food can taste bland in space

Some people who live in space have said that food is not the same while in microgravity. Some say that it tastes bland, some do not like their favorite foods and some love to eat foods they would never eat on Earth. We believe this phenomenon is caused by something called “stuffy head” This happens when crew member’s heads get stopped up because blood collects in the upper part of the body. For this reason, hot sauce is used A LOT on the space station to make up for the bland flavor.

Astronaut ice cream is not actually eaten on the space station

Even though astronaut ice cream is sold in many science centers and enjoyed by many people on Earth, it’s not actually sent to the space station. That said, whenever there is space in a freezer heading to orbit, the astronauts can get real ice cream onboard! 

Instead of bowls there are bags and cans

Most American food is stored in sealed bags, while most Russian food is kept in cans. 

Here’s what the crew aboard the space station enjoyed during Thanksgiving in 2015: 

Smoked Turkey

Candied Yams

Rehydratable Corn

Potatoes Au Gratin 

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

Astronaut Journal Entry - Unusual Attitude Recovery

Currently, six humans are living and working on the International Space Station, which orbits 250 miles above our planet at 17,500mph. Below you will find a real journal entry, written in space, by NASA astronaut Scott Tingle.

To read more entires from this series, visit our Space Blogs on Tumblr.

While flying fast-moving jets, we practice the art of recovering from unusual attitudes. We close our eyes, and let the instructor put the jet in an unexpected attitude. Sometimes straight up, sometimes straight down, sometimes upside down, and sometimes anything in-between. The goal is to open our eyes, analyze the situation and make rapid and smooth corrections to power and attitude to effect a speedy recovery to straight and level flight without departing controlled flight, or having to endure high G’s, or experiencing big losses of altitude. 

Sometimes, when I crawl into my crew quarters on the space station, it is very dark – just like closing our eyes in the jet. And then, as I sleep, my body floats around and changes position. When I awake in total darkness, I have to figure out what attitude I am in relative to my crew quarters and then right myself.  “Unusual Attitude Recovery” can be pretty funny. And sometimes, my heart can get pumping as I awake and realize I don’t know what my attitude is. I execute my procedures to figure out what my attitude is, and then correct it. At first, it used to take me a while to realize. But now, it is second nature – and it always brings a smile to my face.

Find more ‘Captain’s Log’ entries HERE.

Follow NASA astronaut Scott Tingle on Instagram and Twitter.

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com.  

10 Things: How to Photograph a Meteor Shower

Taking photographs of a meteor shower can be an exercise in patience as meteors streak across the sky quickly and unannounced, but with these tips – and some good fortune – you might be rewarded with a great photo.

These tips are meant for a DSLR or mirrorless camera, but some point-and-shoot cameras with manual controls could be used as well.

1. The Photo Op: Perseids Meteors

The Perseids are dusty remnants of comet 109P/Swift-Tuttle.

Earth passes through the comet’s invisible, multi-billion mile trail of tiny debris each year around August, creating a meteor shower of so-called “shooting stars” as the particles are vaporized in our atmosphere.

Perseid meteors already are streaking across the sky. This year's shower peaks on a moonless summer night -from 4 pm on the 12th until 4 am on the 13th Eastern Daylight Time.

Read more on the Perseids ›

2. Get away from city lights and find a place with dark skies.

In this 30 second exposure, a meteor streaks across the sky in Spruce Knob, West Virginia, during the 2016 Perseids meteor shower. Credit: NASA/Bill Ingalls

Too much light and it will be hard for your eyes to see fainter meteors, plus your image will get flooded with the glow of light. Turning down the brightness of the camera’s LCD screen will help keep your eyes adjusted to the dark. The peak of the 2018 Perseid meteor shower occurs just after the new moon, meaning a thin crescent will set long before the best viewing hours, leaving hopeful sky watchers with a moonlight-free sky!

3. Use a tripod.

In this ten-second exposure, a meteor streaks across the sky above Washington, DC during the 2015 Perseids meteor shower, Credit: NASA/Joel Kowsky

Meteor photography requires long exposures, and even the steadiest of hands can’t hold a camera still enough for a clear shot. Heavier tripods help reduce shaking caused by wind and footsteps, but even a lightweight tripod will do. You can always place sandbags against the feet of the tripod to add weight and stability. If you don’t have a tripod, you might be able to prop your camera on or up against something around you, but be sure to secure your camera.

4. Use a wide-angle lens.

In this 30 second exposure taken with a circular fish-eye lens, a meteor streaks across the sky during the 2016 Perseids meteor shower as a photographer wipes moisture from the camera lens Friday, August 12, 2016 in Spruce Knob, West Virginia. Credit: NASA/Bill Ingalls

A wide-angle lens will capture more of the sky and give you a greater chance of capturing a meteor in your shot, while a zoom lens captures a smaller area of the sky. The odds of a meteor streaking past that small patch are lower.

5. Use a shutter release cable or the camera’s built-in timer.

Long exposures are not just for meteors. In this shot taken at Joshua Tree National Park, a hiker's headlamp leaves a trail of light along a twilight path. Credit: National Park Service / Hannah Schwalbe

A tripod does a great job of reducing most of the shaking your camera experiences, but even the act of pressing the shutter button can blur your extended exposure. Using the self-timer gives you several seconds for any shaking from pressing the shutter button to stop before the shutter is released. A shutter release cable (without a self-timer) eliminates the need to touch the camera at all. And if your camera has wifi capabilities, you might be able to activate the shutter from a mobile device.

6. Manually focus your lens.

In this 30 second exposure, a meteor streaks across the sky during the annual Perseids meteor shower Friday, August 12, 2016 in Spruce Knob, West Virginia. Credit: NASA/Bill Ingalls

At night, autofocus will struggle to find something on which to focus. Setting your focus to infinity will get you close, but chances are you’ll have to take some test images and do some fine tuning. With your camera on a tripod, take a test image lasting a few seconds, then use the camera’s screen to review the image. Zoom in to a star to see how sharp your focus is. If the stars look like fuzzy blobs, make tiny adjustments to the focus and take another test image.

Repeat until you are happy with the result.

If your camera has a zoomable electronic viewfinder or live view option, you might be able to zoom to a star and focus without having to take a test image.

7. Aim your camera.

The Perseids appear to radiate from the constellation Perseus, visible in the northern sky soon after sunset this time of year.

Even though we don’t know when or where a single meteor will appear, we do know the general area from which they’ll originate.

Meteor showers get their name based on the point in the sky from which they appear to radiate. In the case of the Perseids, during their peak, they appear to come from the direction of the constellation Perseus in the northern sky.

8. Calculate your exposure time.

In this 20-second exposure, a meteor lights up the sky over the top of a mountain ridge near Park City, Utah. Even though this image was captured during the annual Perseid meteor shower, this "shooting star" is probably not one of the Perseid meteors, which originate from material left behind by Comet Swift-Tuttle. Instead, it's likely one of the many bits of rock and dust that randomly fall into the atmosphere on any given night. Credit: NASA/Bill Dunford

As Earth rotates, the stars in the sky appear to move, and if your shutter is open long enough, you might capture some of that movement. If you want to avoid apparent star movement, you can follow the 500 Rule. Take 500 and divide it by the length in millimeters of your lens. The resulting number is the length of time in seconds that you can keep your shutter open before seeing star trails. For example, if you’re using a 20 mm lens, 25 seconds (500 divided by 20) is the longest you can set your exposure time before star trails start to show up in your images.

9. Experiment!

In this 30 second exposure photo, hikers find their way to the top of Spruce Knob in West Virginia to view the annual Perseids meteor shower, Friday, August 12, 2016. Credit: NASA/Bill Ingalls

Once you know the maximum exposure time, you can set your shutter priority to that length and let the camera calculate other settings for your first image. Depending on how the image turns out, you can manually adjust aperture (set it to a lower number if the image is too dark) and ISO (set it to a higher number if the image is too dark) to improve your next images. Changing only one setting at a time will give you a better understanding of how those changes affect your image.

10. Enjoy the show.

The crew of the International Space Station captured this Perseid meteor falling to Earth over China in 2011. Credit: NASA

With your camera settings adjusted, capturing that perfect photo is just a matter of time and luck. The highest rate of meteors visible per hour is in the hours after midnight and before dawn. Set up your camera next to a lounge chair or a blanket to witness the wonder of a meteor shower for yourself – and, with any luck, you’ll take home some envy-inducing shots, too!

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com.

Solar System: 10 Things to Know This Week

The Living Planet Edition

Whether it's crops, forests or phytoplankton blooms in the ocean, our scientists are tracking life on Earth. Just as satellites help researchers study the atmosphere, rainfall and other physical characteristics of the planet, the ever-improving view from above allows them to study Earth's interconnected life.

1. Life on Earth, From Space

While we (NASA) began monitoring life on land in the 1970s with the Landsat satellites, this fall marks 20 years since we've continuously observed all the plant life at the surface of both the land and ocean. The above animation captures the entirety of two decades of observations.

2. Watching the World Breathe

With the right tools, we can see Earth breathe. With early weather satellite data in the 1970s and '80s, NASA Goddard scientist Compton Tucker was able to see plants' greening and die-back from space. He developed a way of comparing satellite data in two wavelengths.

When healthy plants are stocked with chlorophyll and ready to photosynthesize to make food (and absorb carbon dioxide), leaves absorb red light but reflect infrared light back into space. By comparing the ratio of red to infrared light, Tucker and his colleagues could quantify vegetation covering the land.

Expanding the study to the rest of the globe, the scientists could track rainy and dry seasons in Africa, see the springtime blooms in North America, and wildfires scorching forests worldwide.

3. Like Breathing? Thank Earth's Ocean

But land is only part of the story. The ocean is home to 95 percent of Earth's living space, covering 70 percent of the planet and stretching miles deep. At the base of the ocean's food web is phytoplankton - tiny plants that also undergo photosynthesis to turn nutrients and carbon dioxide into sugar and oxygen. Phytoplankton not only feed the rest of ocean life, they absorb carbon dioxide - and produce about half the oxygen we breathe.

In the Arctic Ocean, an explosion of phytoplankton indicates change. As seasonal sea ice melts, warming waters and more sunlight will trigger a sudden, massive phytoplankton bloom that feeds birds, sea lions and newly-hatched fish. But with warming atmospheric temperatures, that bloom is now happening several weeks earlier - before the animals are in place to take advantage of it.

4. Keeping an Eye on Crops

The "greenness" measurement that scientists use to measure forests and grasslands can also be used to monitor the health of agricultural fields. By the 1980s, food security analysts were approaching NASA to see how satellite images could help with the Famine Early Warning System to identify regions at risk - a partnership that continues today.

With rainfall estimates, vegetation measurements, as well as the recent addition of soil moisture information, our scientists can help organizations like USAID direct emergency help.

The view from space can also help improve agricultural practices. A winery in California, for example, uses individual pixels of Landsat data to determine when to irrigate and how much water to use.

5. Coming Soon to the International Space Station

A laser-based instrument being developed for the International Space Station will provide a unique 3-D view of Earth's forests. The instrument, called GEDI, will be the first to systematically probe the depths of the forests from space.

Another ISS instrument in development, ECOSTRESS, will study how effectively plants use water. That knowledge provided on a global scale from space will tell us "which plants are going to live or die in a future world of greater droughts," said Josh Fisher, a research scientist at NASA's Jet Propulsion Laboratory and science lead for ECOSTRESS.

6. Seeing Life, From the Microscopic to Multicellular

Scientists have used our vantage from space to study changes in animal habitats, track disease outbreaks, monitor forests and even help discover a new species. Bacteria, plants, land animals, sea creatures and birds reveal a changing world.

Our Black Marble image provides a unique view of human activity. Looking at trends in our lights at night, scientists can study how cities develop over time, how lighting and activity changes during certain seasons and holidays, and even aid emergency responders during power outages caused by natural disasters.

7. Earth as Analog and Proving Ground

Just as our Mars rovers were tested in Earth's deserts, the search for life on ocean moons in our solar system is being refined by experiments here. JPL research scientist Morgan Cable looks for life on the moons of Jupiter and Saturn. She cites satellite observations of Arctic and Antarctic ice fields that are informing the planning for a future mission to Europa, an icy moon of Jupiter.

The Earth observations help researchers find ways to date the origin of jumbled, chaotic ice. "When we visit Europa, we want to go to very young places, where material from that ocean is being expressed on the surface," she explained. "Anywhere like that, the chances of finding biomarkers goes up - if they're there."

8. Only One Living Planet

Today, we know of only one living planet: our own. The knowledge and tools NASA developed to study life here are among our greatest assets as we begin the search for life beyond Earth.

There are two main questions: With so many places to look, how can we home in on the places most likely to harbor life? What are the unmistakable signs of life - even if it comes in a form we don't fully understand? In this early phase of the search, "We have to go with the only kind of life we know," said Tony del Genio, co-lead of a new NASA interdisciplinary initiative to search for life on other worlds.

So, the focus is on liquid water. Even bacteria around deep-sea vents that don't need sunlight to live need water. That one necessity rules out many planets that are too close or too far from their stars for water to exist, or too far from us to tell. Our Galileo and Cassini missions revealed that some moons of Jupiter and Saturn are not the dead rocks astronomers had assumed, but appear to have some conditions needed for life beneath icy surfaces.

9. Looking for Life Beyond Our Solar System

In the exoplanet (planets outside our solar system that orbit another star) world, it's possible to calculate the range of distances for any star where orbiting planets could have liquid water. This is called the star's habitable zone. Astronomers have already located some habitable-zone planets, and research scientist Andrew Rushby of NASA Ames Research Center is researching ways to refine the search. "An alien would spot three planets in our solar system in the habitable zone [Earth, Mars and Venus]," Rushby said, "but we know that 67 percent of those planets are not inhabited."

He recently developed a model of Earth's carbon cycle and combined it with other tools to study which planets in habitable zones would be the best targets to look for life, considering probable tectonic activity and water cycles. He found that larger planets are more likely than smaller ones to have surface temperatures conducive to liquid water. Other exoplanet researchers are looking for rocky worlds, and biosignatures, the chemical signs of life.

10. You Can Learn a Lot from a Dot

When humans start collecting direct images of exoplanets, even the closest ones will appear as only a handful of pixels in the detector - something like the famous "blue dot" image of Earth from Saturn. What can we learn about life on these planets from a single dot?

Stephen Kane of the University of California, Riverside, has come up with a way to answer that question by using our EPIC camera on NOAA's DSCOVR satellite. "I'm taking these glorious pictures and collapsing them down to a single pixel or handful of pixels," Kane explained. He runs the light through a noise filter that attempts to simulate the interference expected from an exoplanet mission. By observing how the brightness of Earth changes when mostly land is in view compared with mostly water, Kane reverse-engineers Earth's rotation rate - something that has yet to be measured directly for exoplanets.

The most universal, most profound question about any unknown world is whether it harbors life. The quest to find life beyond Earth is just beginning, but it will be informed by the study of our own living planet.

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com.

To all those looking to the stars, believe in yourself – we do. ❤️ ⁣ ⁣ From auto mechanic to geologist - everyone's story is different. Our NASA astronauts come from all walks of life, with backgrounds as unique as the individuals themselves. ⁣ ⁣ Get to know their stories and even apply to #BeAnAstronaut, HERE. Applications close March 31. ⁣ ⁣

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com.

Return to Venus

Japan's Akatsuki orbiter is making a second attempt to enter orbit around Venus today, Dec. 7. A malfunction in 2010 caused the spacecraft to miss its first orbit opportunity. The mission team came up with a plan to try again this week. In honor of Akatsuki, here are a few things you need to know about Venus, physics and other missions to explore our solar system's second planet:

1. Venus Climate Orbiter

The down-to-business names for Akatsuki - which means "Dawn" or "Daybreak" in Japanese - are Venus Climate Orbiter and Planet-C. Akatsuki is Japan's third deep space mission. At Venus, the orbiter will study Venusian meteorology. JAXA defines the mission's goals as:

Observing Venus as a whole to understand its perpetual cloud layer, deep atmosphere and surface

Close observations of cloud structures and convection

Searching for signs of lightning and air glow

2. Exploring Venus

Venus played a key role in early deep space exploration. Our Mariner 2 was the first successful interplanetary mission in 1962. And several Soviet spacecraft have made the tough descent and landing on Venus' hellish surface. HERE is a list of other missions to Venus.

3. All About Venus

Similar in structure and size to Earth, Venus' thick, toxic atmosphere traps heat in a runaway greenhouse effect. A permanent layer of clouds traps heat, creating surface temperatures hot enough to melt lead. Glimpses below the clouds reveal volcanoes and deformed mountains. Venus spins slowly in the opposite direction of most planets.

4. Sizing Up the Solar System

Venus also played a key role in determining the distance between Earth and the sun - creating the Astronomical Unit, the basic measurement we use to define our place in the cosmos. Many 18th century explorers, including the legendary James Cook, undertook perilous journeys to define the astronomical unit by watching Venus cross the face of the sun.

5. It’s Just a Phase

Like the moon, Venus has phases. It can be full when Venus is on the far side of the sun, new when Venus is between the sun and Earth and a crescent at other points in between. Take a look at Galileo Galilei’s sketches of the phases of Venus HERE.

Follow Along:

As mentioned, Japan's Akatsuki orbiter is making a second attempt to enter orbit around Venus today, Dec. 7. Follow along HERE for updates on this attempt. 

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com